PRODUCTS

Alkaline Water-Based Gel
Formulated with surfactants and water-soluble solvents to remove ink and emulsion residues. It is especially recommended for removing shadow/ghost stains. It can also be used as a degreaser with a pre-coating. It does not contain chemicals or chlorine compounds that may damage the silk. It does not shorten the lifespan of the screens.

SAFETY INSTRUCTIONS
Abrasive product. Use goggles and gloves.

USAGE INSTRUCTIONS
Apply to both sides of the dry screen using a brush or ragle. Refer to the table below for the desired result.

 Silk (cm)          | Ghost Image and Ink Residues High Emulsion Cleaning (Hardened)  
12-60T silk       | 5/15 min.                                                  15 to 30 min.   
68-90T silk       | 10/20 min.                                                20 to 40 min.    
110-160T silk   | 10/30 min.                                                20 to 50 min.  

For screens with thick coatings, cleaning time is 45 minutes to 1 hour. Leave the screen in a horizontal position. If possible, leave it between 22-35°C. Do not store at temperatures above 35°C.
Before washing with pressurized water, clean with low-pressure water to remove the odor. Perform the above application for 10 minutes to remove emulsion and ghost image stains. There is no need for the screen to be completely dry. The water should be removed to the maximum.

STARGEL 350 + STARGEL ACTIVATOR 
If you want to activate STARGEL 350, you can use the activator. The recommended ratio is 1:1.