PRODUCTS

Special Product for Screen Printing
This is a special paste for screen printing that works on all types of glass (except borosilicate, pyrex). When applied, it quickly imprints the design onto the glass or gives a frosted appearance within minutes and fixes it. It is also effective on glazed ceramic surfaces.

SAFETY INSTRUCTIONS
Corrosive product. Use gloves, protective glasses, etc.

APPLICATION
Prepare for printing. You can use it pure or, if desired, mix 1 part Kopiglasmat thinner with 5 parts Kopiglasmat paste. Only use plastic or wooden containers, as it can rust many metals.

This product should be stored between 23-26°C. If exposed to low temperatures, crystallization may occur. Heating the product to 25-30°C will eliminate the crystallization.

We recommend working with silk of 39-49 mesh and water-resistant emulsion.

The glass should be clean, dry, and at room temperature. Wait for 3-5 minutes before the Kopiglasmat reacts with the glass before printing. Clean the glass thoroughly with water. Ensure excellent ventilation in the working area.

After use, clean the stencil immediately with water, as Kopiglasmat may clog the screen. Carefully clean the tools after printing.